Ubicación: Global + English
Global Global Algérie Français Algeria English Angola Português Angola English Argentina Español Argentina English Australia English Austria Deutsch Austria English Azerbaijan English Azerbaijan Русский Bahrain English Bangladesh English Belgium English Belgium Français Belgium Nederlands Brazil Português Brazil English Bulgaria български Bulgaria English Cameroon English Cameroon Français Canada English Canada Français Chile Español Chile English China 中文 China 日本語 China English Colombia Español Colombia English Croatia English Czech Republic Čeština Czech Republic English Denmark English Djibouti English Ecuador Español Ecuador English Egypt English Estonia English Ethiopia English Finland Suomi Finland English France Français France English Georgia English Georgia Русский Germany Deutsch Germany English Ghana English Greece Ελληνικά Greece English Guatemala Español Guatemala English Hong Kong, China English Hong Kong, China 中文 Hungary Magyar Hungary English India English Indonesia English Iraq English Ireland English Italy Italiano Italy English Ivory Coast Français Ivory Coast English Japan 日本語 Japan English Jordan English Kazakhstan Русский Kazakhstan English Kenya English Kuwait English Kyrgyzstan Русский Kyrgyzstan English Latvia English Lithuania English Malaysia English Mauritius English Mauritius français (Maurice) Mexico Español Mexico English Moldova Română Moldova English Mongolia English Morocco English Morocco Français Mozambique Português Mozambique English Netherlands Nederlands Netherlands English New Zealand English Nigeria English Norway English Oman English Pakistan English Paraguay Español Paraguay English Peru Español Peru English Philippines English Poland Polski Poland English Portugal Português Portugal English Qatar English Republic of Korea 한국어 Republic of Korea English Romania Română Romania English Saudi Arabia English Serbia Српски Serbia English Singapore English Slovakia English Slovenia English South Africa English Spain English Spain Español Sri Lanka English Sweden English Switzerland Deutsch Switzerland Français Switzerland Italiano Switzerland English Tanzania English Thailand ไทย Thailand English Togo English Togo Français Tunisia English Tunisia Français Türkiye Türkçe Türkiye English Turkmenistan Русский Turkmenistan English Ukraine Українська Ukraine English United Arab Emirates English United Kingdom English Uruguay Español Uruguay English USA English Uzbekistan English Uzbekistan Русский Vietnam Tiếng Việt Vietnam English

Hardened Layer Hardness Testing Plan: Standards, Methods, and Implementation Guidelines

Hardened layer hardness testing is a critical quality control practice for verifying surface hardness, hardness gradients, and effective hardened depth in induction hardened, flame hardened, carburized, and nitrided steel components. This technical article presents a complete hardened layer hardness testing plan covering sample preparation, testing items, applicable standards such as ISO 2639, ISO 3754, ASTM E384, and GB/T 9450, measurement procedures, data interpretation, and typical industrial applications. It serves as a practical reference for heat treatment engineers, quality assurance specialists, and accredited third-party laboratories.

Technical Overview

A hardened layer is the near-surface zone of a steel component whose hardness has been substantially increased by heat treatment processes such as induction hardening, flame hardening, carburizing and quenching, carbonitriding, or nitriding. The hardened layer provides wear resistance, fatigue strength, and rolling contact durability while preserving a tough and ductile core. Because in-service performance depends directly on both the hardness level and the depth of this layer, hardness testing is the primary acceptance method for surface hardened parts.

A hardened layer hardness testing plan defines how components are sampled, how cross-sections are prepared, which hardness scales and test forces are applied, and how the effective and total hardened depths are determined. The plan is built on internationally recognized standards, including the following:

  • ISO 6507-1 / ASTM E92 / ASTM E384 — Vickers and microindentation hardness testing
  • ISO 6508 / ASTM E18 — Rockwell hardness testing
  • ISO 2639 / GB/T 9450 — effective depth of carburized and hardened cases
  • ISO 3754 / GB/T 5617 — effective depth of hardening after flame or induction hardening
  • ASTM E1077 / GB/T 9451 — depth of carburizing and total hardened depth after surface hardening
  • DIN 50190-3 / GB/T 11354 — hardness depth of nitrided cases
  • ASTM E140 — hardness value conversions between HV, HRC, and HR15N scales

When executed correctly, the plan delivers a quantified hardness-versus-depth profile that confirms conformance with drawing requirements, validates heat treatment process parameters, and supports failure analysis when premature wear or fatigue occurs.

Testing Samples

The testing plan must clearly define which components or witness specimens are tested, since hardened layer properties vary with geometry, steel grade, and process parameters. Typical sample categories are described below.

Induction and Flame Hardened Components

These include crankshaft journals, camshafts, axle shafts, wheel hubs, spindles, sprockets, and guideways. The hardened layer is typically 1 to 5 mm deep with a characteristic hardness drop at the transition to the untransformed core. Sampling should target both the middle and the edges of the hardened pattern, where quench severity and heating uniformity are most critical.

Carburized and Carbonitrided Components

Transmission gears, pinions, cam followers, bushings, and bearing rings are commonly carburized and quenched to achieve effective case depths of roughly 0.3 to 2.5 mm. Specimens are taken from actual production parts, overrun samples, or process coupons heat treated together with the production load.

Nitrided and Nitrocarburized Components

Precision spindles, extrusion tooling, forging dies, plungers, and hydraulic components carry thinner compound and diffusion layers, typically 0.1 to 0.7 mm. Because these layers are thin and steeply graded, they demand low-force microhardness measurement and careful edge preparation.

Specimen Preparation Requirements

  • Section the component perpendicular to the hardened surface using abrasive cutting with abundant coolant, preventing any tempering, secondary hardening, or microstructural alteration of the layer.
  • Mount the section in resin with the hardened surface flat and fully supported to avoid edge rounding during grinding.
  • Grind and polish to metallographic quality with a finish of 1 µm or finer, avoiding overheating and smearing that distort microhardness readings.
  • Etch a duplicate section or lightly etch after indentation positioning with 2 to 3 percent nital to reveal the hardened zone; quantitative hardness traverses should be performed on a polished surface free from etch relief.
  • For large components that cannot be sacrificed, use representative witness coupons processed in the same furnace or induction setup, mounted identically to the production parts.

Testing Items

The testing plan should enumerate every measurable characteristic of the hardened layer so that acceptance criteria are unambiguous. Standard testing items include:

  • Surface hardness of the functional surface in HRC, HV, or HR15N depending on layer thickness
  • Hardness gradient or profile from the surface to the core, presented as tabulated values and a plotted curve
  • Effective hardened depth, defined as the depth at a specified functional hardness limit
  • Total hardened depth, defined as the depth at which hardness equals the core hardness
  • Core hardness measured at mid-radius or mid-thickness away from the hardened zone
  • Circumferential and axial hardness uniformity across the hardened pattern
  • Verification of minimum and maximum hardness and depth values against the engineering drawing
  • Detection of anomalies such as surface decarburization, insufficient hardenability, or an overly abrupt transition zone

Testing Methods

Surface Hardness Testing

Bulk surface hardness is measured directly on the functional surface. Rockwell C testing per ISO 6508 or ASTM E18 is suitable when the effective depth exceeds approximately 0.8 mm; superficial Rockwell scales such as HR15N or HR30N are applied to thinner layers; Vickers testing at HV10 or HV30 provides a continuous scale free from scale-conversion error. For very thin nitrided compound layers, micro-Vickers or Knoop testing per ASTM E384 is required.

Microhardness Traverse Procedure

  • Calibrate the microhardness tester against certified reference blocks traceable to national standards, verifying at the exact test force to be used, typically HV0.5 to HV1.
  • Position the first indentation as close to the surface as practicable, typically 0.05 mm for carburized cases and immediately below any visible compound layer for nitrided cases.
  • Make a series of indentations along a straight line perpendicular to the surface, with spacing between adjacent indentations of at least 2.5 times the indentation diagonal and typical step increments of 0.05 to 0.1 mm.
  • Measure both diagonals at a magnification of 400 times or greater and convert them to HV values.
  • Plot hardness versus depth and locate the specified hardness limit depth by linear interpolation between the bracketing points.
  • Perform at least two traverses per section, commonly three, and report both individual and averaged depth values.

Effective Case Depth for Carburized Cases

Per ISO 2639 and GB/T 9450, the effective case depth of a carburized and hardened case is the depth at which the hardness equals 550 HV measured with a 9.807 N force, which corresponds to HV1. Where a specification invokes ASTM E1077, the effective or microcase depth may instead be defined at the 50 HRC equivalent hardness level; the governing criterion must be stated in the test report.

Effective Hardened Depth for Induction and Flame Hardened Cases

Per ISO 3754 and GB/T 5617, the effective depth of hardening after flame or induction hardening is the depth at which the hardness equals 80 percent of the minimum specified surface hardness. For example, a part specified at a minimum surface hardness of 620 HV has a hardness limit of 496 HV. The traverse is performed with HV0.5 or HV1 forces, and the limit depth is obtained by interpolation.

Nitriding Hardness Depth

Per DIN 50190-3 and GB/T 11354, the nitriding hardness depth is the depth at which hardness falls to an agreed limit, most commonly the core hardness plus 50 HV. Because nitrided layers are thin and steeply graded, test forces of HV0.5 or lower are used, and Knoop indentations with the long diagonal parallel to the surface are advantageous in the outermost region.

Layer Removal Rockwell Method

As an alternative macro-scale method permitted by ASTM E1077, material is removed in controlled increments of approximately 0.1 mm by light grinding or turning, and Rockwell C hardness is measured on each newly exposed surface. This method suits cases where microhardness equipment is unavailable, though it is destructive and offers lower spatial resolution.

Data Interpretation and Reporting

  • The test report must include the material and heat treatment condition, the standard applied, test forces, the hardness limit criterion, the full hardness-depth data set and curve, effective and total depth values, surface hardness, and core hardness.
  • Uniformity is evaluated by testing multiple sections, for example three circumferential positions spaced 120 degrees apart, with individual depth values required to fall within the drawing tolerance.
  • A measurement uncertainty statement should accompany the effective depth value, accounting for indentation spacing, interpolation, and hardness measurement scatter.
  • Abnormal profiles, such as a soft surface over a hard subsurface, indicate decarburization or grinding damage and trigger corrective investigation even if depth requirements are met.

Applications

Hardened layer hardness testing is applied across every industry that relies on surface hardening for performance and durability. Representative applications include:

  • Automotive powertrain: transmission gears, differential pinions, crankshafts, camshafts, constant velocity joints, and steering knuckles
  • Railway engineering: axles, wheel treads, rails, and switch components subject to rolling contact fatigue
  • Wind energy and heavy machinery: planetary gears, slewing bearings, and girth gears with large induction hardened or carburized cases
  • Oil and gas: drill tool joints, valve seats, pump plungers, and sucker rods requiring combined wear and fatigue resistance
  • Machine tools: spindles, guideways, ball screws, and quench-hardened slideways
  • Bearing manufacturing: raceways and rolling elements verified for effective case depth and core hardness
  • Tooling: nitrided forging dies, stamping punches, and extrusion tooling checked for nitriding depth and surface hardness
  • Quality assurance and failure analysis: validation of heat treatment cycles, assessment of tempering damage, and root cause investigation of worn or spalled components

FAQ

What is the difference between effective case depth and total case depth?

Effective case depth is the depth at which hardness reaches a specified functional limit, such as 550 HV1 for carburized cases or 80 percent of the minimum surface hardness for induction hardened cases. Total case depth is the depth at which hardness becomes indistinguishable from the core hardness. Total case depth is always the larger value and is confirmed either metallographically or by extending the hardness traverse into the core.

Which test force should be selected for the hardness traverse?

For carburized and induction hardened layers, HV1 is the standard force referenced by ISO 2639 and related specifications, while HV0.5 improves spatial resolution across sharp transitions. For thin nitrided layers between 0.1 and 0.3 mm, HV0.5 or HV0.1, together with Knoop indentations, keeps the indentation size small relative to the case so that gradient resolution is maintained.

How close to the surface can the first indentation be placed?

Within roughly 2.5 indentation diagonals of the edge, measured hardness is lowered by edge-related plastic flow. For HV1 testing this corresponds to approximately 0.03 to 0.05 mm. The hardness of the outermost thin layers is therefore best confirmed with Knoop indentations oriented with the long diagonal parallel to the surface, or with superficial Rockwell testing performed on the component surface itself.

How many traverses and sections are required for a valid result?

Common industrial practice requires a minimum of two traverses on each of at least two sections per component, with three traverses preferred. The reported effective depth is the mean of the traverses, and every individual traverse must satisfy the drawing tolerance before the component is accepted.

How is the hardness limit depth calculated precisely?

The limit is located by linear interpolation between the two adjacent points that bracket it. For example, if 600 HV occurs at 0.90 mm and 540 HV occurs at 1.00 mm, the 550 HV limit lies at 0.98 mm. Some specifications also permit graphical determination directly from the plotted hardness-depth curve.

Can hardened layer hardness be checked non-destructively?

Surface hardness can be spot-checked on finished parts using portable ultrasonic contact impedance or rebound hardness testers, which is useful for in-process control on machined surfaces. However, depth determination is inherently destructive because it requires a cross-section, so depth acceptance testing is performed on sacrificial parts, overrun samples, or witness coupons processed alongside production.

Why Choose ZKGX?

  • State-of-the-art analytical equipment
  • Highly qualified scientific team
  • Fast turnaround time
  • Competitive pricing